The DMX10-3 is a rackmount 10-port DMX Splitter with dual inputs and freely assignable 3pin XLR DMX outputs. Utilizing long life toggle switches every port is routed to either the A or B input, providing flexibility to...

ENTTEC’s Storm10 is a compact, 10-universe installation-grade Ethernet to DMX to DMX/RDM converter designed to make controlling DMX lights over Ethernet simple by effortlessly converting sACN, Art-Net or ESP...

sunDial quad dmx 1k is a DMX/RDM controlled mains dimmer. Using trailing edge technology, the product provides smooth results with dimmable replacement LED, CFL or incandescent sources, with exceptional performance even at...

rackSplit octo is an 8-output DMX/RDM optosplitter / data-fixer with Neutrik XLR5 connectors. It is designed to sit in a 1U slot in a 19″ rack, with the added bonus that is is only 50mm deep. The slim profile of the...

Rail-Contact monitors the state of 8 contact closures and translates this into a value on DMX channels 1 to 8. When a contact closure is active the corresponding value of DMX is 255. If more than 8 channels are required...

railMerge is a DIN rail mounted product that merges two DMX inputs to one DMX output. The inputs are independently isolated with a high level electrical protection. It is configured via an 8-way DIP switch that enables...

artLynx is an Art-Net 4 / sACN enabled DIN rail ethernet-to-DMX512/RDM gateway. artLynx offers massively increased processing power, allowing it to operate effortlessly on networks which are congested with broadcast data...

railSplit extreme is an upgraded version of railSplit RDM, optimised for harsh conditions and for use in electrically noisy environments. It is a 1-in-to-6-out DMX512 splitter with support for RDM and a fix mode which...

Control LED pixels with ease ENTTEC’s Pixelator Mini is an installation-grade Ethernet pixel converter designed to make control of LED pixel dots and strip simple. In total, the Pixelator Mini can convert up to...