ENTTEC’s S-PLAY MINI is a robust and compact show recorder and playback controller that streamlines your light show by seamlessly integrating external hardware, enabling you to achieve professional lighting control...
ENTTEC’s Storm10 is a compact, 10-universe installation-grade Ethernet to DMX to DMX/RDM converter designed to make controlling DMX lights over Ethernet simple by effortlessly converting sACN, Art-Net or ESP...
The ODE MK3 is a robust, reliable, installation-grade, Ethernet to DMX converter engineered to connect DMX fixtures to your Ethernet network infrastructure. Now you can expand your lighting project to the next level. With...
Engineered for projects that require precise automation, the S-PLAY smart light show controller is your all-in-one solution for the recording, triggering, and activation of not only light shows but video, non-lighting...
The EZ KLING™ is an RJ45 to DMX, KlingNet™, ArtNet and sACN interface, which allows you to pixel map KlingNet™ and DMX compatible fixtures through the KlingNet™ mapper included in Media Master...
The latest evolution of our 8-Universe, dual-output eDMX to LED pixel data converter, the OCTO Mk2 is a robust and reliable installation-grade device. This smart device connects directly to your pixels, engineered to take...
DMX512/RDM controlled 4-channel, mains powered trailing edge dimmer. 1kW total at 230 VAC. Suitable for dimmable LED replacement bulbs, CFL and incandescent sources. Detail sunDial quad dmx 1k is a DMX/RDM controlled mains...
rackSplit octo is an 8-output DMX/RDM optosplitter /data-fixer with Neutrik XLR5 connectors. It is designed to sit in a 1U slot in a 19″ rack, with the added bonus that is is only 50mm deep. The slim profile of the...
RDM/DMX streaming device. 4 inputs, 4 outputs. Compatible with LightShark The LS-Node series is the new RDM/DMX streaming range from WORK PRO that supports industry standards ArtNet & sACN. They feature from 1 up to 4...
RDM/DMX streaming device. 2 inputs, 2 outputs. Compatible with LightShark The LS-Node series is the new RDM/DMX streaming range from WORK PRO that supports industry standards ArtNet & sACN. They feature from 1 up to 4...
RDM/DMX streaming device. 1 input, 1 output. Compatible with LightShark The LS-Node series is the new RDM/DMX streaming range from WORK PRO that supports industry standards ArtNet & sACN. They feature from 1 up to 4 DMX...
railSwitch provides six mains voltage relays that can be switched independently. It is housed in a high impact DIN Rail mounting case. The control interface uses DMX512 and RDM (Remote Device Management). The RDM interface...
Rail-Contact monitors the state of 8 contact closures and translates this into a value on DMX channels 1 to 8. When a contact closure is active the corresponding value of DMX is 255. If more than 8 channels are required...
railMerge is a DIN rail mounted product that merges two DMX inputs to one DMX output. The inputs are independently isolated with a high level electrical protection. It is configured via an 8-way DIP switch that enables...
Art-Switch PoE4™ is a DIN-Rail Layer 2 Ethernet switch. It provides five 10/100BaseT Ethernet ports, four of which support Power over Ethernet (PoE). Art-Switch PoE4 is housed in a small robust DIN Rail case that can...
artLynx is an Art-Net 4 / sACN enabled DIN rail ethernet-to-DMX512/RDM gateway. It is available in three variants: artLynx duo (basic model, 2 universe conversion) artLynx quad (premium model, 4 universe...
Top-of-the-range DIN rail splitter. railSplit extreme is an upgraded version of railSplit RDM, optimised for harsh conditions and use in electrically noisy environments. It is a 1-in-to-6-out DMX512 splitter with support for...
railSplit RDM is a high specification, low cost DMX512/RDM splitter and fixer designed for permanent installations. (If you don’t need RDM, see the sister product railSplit DMX). railSplit RDM is DIN Rail mounted for...
railSplit DMX is an entry level DMX512 splitter designed for permanent installations. (If you need RDM, see the sister product, railSplit RDM). It is DIN Rail mounted for ease of installation. All connections are via screw...
The Data Stream 4 is a universal DMX-512 optical splitter designed to distribute the incoming DMX signal, in daisy chain configurations, into four separate outputs with an additional “thru” port. FEATURES ...
Control LED pixels with ease ENTTEC’s Pixelator Mini is an installation-grade Ethernet pixel converter designed to make control of LED pixel dots and strip simple. In total, the Pixelator Mini can convert up to...
Is your DMX daisy chain out of control? With its stylish black ABS body, designed and made in Australia, the D-Split DMX opto-splitter will make life easier with simplified distribution . The D-Split is both an optical...
Your Sales Partner of Choice
Extended Range, POA Pricing
Back to Top