Categories

Categories

Gird List
  • 19" Rack adapter for Din-Rail products
    £145.00 £116.00

    19" Rack adapter for DIN Rail products. Holds 5 standard products (e.g. Rail-Split DMX) Holds 2 wide products TECHNICAL SPECIFICATIONS Net Mass: 0.50 kg Manufacturer: Artistic Licence Engineering Ltd Country of...


  • 4 universe DMX512 change-over with manual or automatic fail-over
    £355.00 £284.00

    Rail-Flip™ is a modular A-B switch for DMX512 that supports 4 universes. Its primary purpose is automatic switching between a primary and backup lighting controller. It can also be used to switch between different...


  • Art-Switch PoE4
    £365.00 £321.20

    Art-Switch PoE4™ is a DIN-Rail Ethernet switch. It provides five 10/100BaseT Ethernet ports, four of which support Power over Ethernet (PoE). Art-Switch PoE4 is housed in a small robust DIN Rail case that can also be...


  • DIN Rail Contact closure DMX Trigger Unit
    £255.00 £204.00

    Rail-Contact monitors the state of 8 contact closures and translates this into a value on DMX channels 1 to 8. When a contact closure is active the corresponding value of DMX is 255. If more than 8 channels are required...


  • DIN Rail mount DALI controlled 6 channel mains relay
    £295.00 £236.00

    In theatre, touring and architectural applications there are invariably some devices that do not provide a useful form of remote control. daliSwitch™ is an elegant solution to the automation of these devices. Housed...


  • DIN Rail mount DALI controlled 6 channel mains relay.
    £295.00 £236.00

    In theatre, touring and architectural applications there are invariably some devices that do not provide a useful form of remote control. daliSwitch™ is an elegant solution to the automation of these devices. Housed...


  • DIN Rail mount DMX controlled 6 channel mains relay
    £275.00 £220.00

    Rail-Switch™ II provides six mains voltage relays that can be switched independently. It is housed in a high impact DIN Rail mounting case. The control interface uses DMX512 and RDM (Remote Device Management)...


  • DIN Rail mount DMX to 16 channel analogue
    £395.00 £316.00

    DMX512 to analogue conversion has two key applications: Upgrading older analogue dimmers and driving fluorescent ballasts. Rail-Demux™ is an elegant solution to both applications and provides 16 analogue outputs with...


  • DIN Rail mount DMX to DALI converter
    £415.00 £332.00

    Rail-DMX-DALI converts DMX values into DALI commands to allow integration between a DMX controller and DALI ballasts. (For conversion of DALI into DMX, please see the sister product, Rail-DALI-DMX). Up to four DALI circuits...


  • DIN RDS4
    £193.00 £154.40

    The DIN-RDS4 is a 4 port DMX/RDM isolated splitter. It can be used in distributing and isolating DMX/RDM signals. The DIN-RDS4 fully complies to the RDM ANSI E1.20 standard. Technical Specifications 4 output DMX ports on 3...


  • DIN RS232
    £79.00 £63.20

    The DIN-RS232 is an RS232 to DIN-NET interface device. It can send RS232 strings when a particular DIN-NET action is received or send preprogrammed din-net actions when it receives an RS232 string matching a pre-programmed...


  • DIN-Input 8
    £79.00 £63.20

    The DIN-INPUT 8 is an 8 dry contact input to din-net device. It can detect a close or open on any of its 8 isolated inputs and send a programmed action to any other node on the DIN-NET network. Such uses could be interfacing...


  • DIN-LED4 1000X
    £114.00 £91.20

    The DIN-LED4 1000X is a 4 channel constant current 1000mA LED driver with DMX/RDM input. Each channel can control up to seven 3Watt leds in series Dimming is performed with a 500Hz PWM signal, and 8 bit resolution. There are...


  • DIN-LED4 350X
    £88.00 £70.40

    The DIN-LED4 350X is a 4 channel constant current 350mA LED driver with DMX/RDM input. Each channel can control up to seven 1Watt leds in series Dimming is performed with a 500Hz PWM signal, and 8 bit resolution. There are 2...


  • DIN-LED4 700X
    £106.00 £84.80

    DIN-LED4 700X is a 4 channel constant current 700mA LED driver with DMX/RDM input. Each channel can control up to seven 2Watt leds in series Dimming is performed with a 500Hz PWM signal, and 8 bit resolution. There are 2...


  • DIN-ODE Mk2
    £175.00 £140.00

    The DIN-ODE is the industry's first affordable DIN-RAIL DMX Ethernet gateway. Out of the box, the DIN-ODE is configured as an Art-Net output node on universe 0:0 but can be easily and quickly changed using the free NMU tool...


  • DIN-Power
    £53.00 £42.40

    The DIN-POWER is a power injector for the DIN-NET network. At least 1is needed for every din-net network. The din-power module takes 9 to 24V DC Input from an external power supply through a screw terminal or DC Jack and...


  • DIN-Relay 4
    £79.00 £63.20

    DIN-TEC modules are highly flexible products that can be used to interface a number of different products and be programmed to perform simple logic operations. Each module sits on a standard DIN Rail that can be mounted...


  • Four channel DALI Bus Power Supply
    £265.00 £212.00

    Rail-PSU-D4 is a DALI Bus PSU with four outputs (enabling it to power four DALI circuits of up to 64 ballasts each). It has two connections per output to facilitate daisy chain connection, providing easy installation into...


  • Rail-DALI-DMX
    £415.00 £365.20

    Rail-DALI-DMX converts one circuit of DALI to DMX; it is designed for environments that require integration between the two protocols. (For conversion of DMX into DALI, please see the sister product, Rail-DMX-DALI)...


  • Rail-Merge
    £375.00 £330.00

    Rail-Merge is a DIN rail mounted product that merges two DMX inputs to one DMX output. The inputs are independently isolated with a high level electrical protection. It is configured via an 8-way DIP switch that enables...


  • Rail-Split DMX
    £245.00 £215.60

    Rail-Split™ DMX is an entry level DMX512 splitter designed for permanent installations. It is DIN Rail mounted for ease of installation. All connections are via screw terminals. DMX loop through and termination...


  • Rail-Split extreme
    £345.00 £303.60

    Rail-Split extreme is our top-of-the-range DIN rail splitter. It is an upgraded version of Rail-Split RDM II that is optimised for harsh conditions and use in electrically noisy environments. Both products feature...


  • Artistic Licence Rail-Split RDM II
    £275.00 £242.00

    Rail-Split™ RDM II is a high specification, low cost DMX512/RDM splitter and fixer designed for permanent installations. Rail-Split RDM II is DIN Rail mounted for ease of installation. All connections are via...


  • Rail-Split RJ45
    £325.00 £260.00

    4-way mains powered DMX512/RDM splitter with all RJ45 connectors. Isolated input. DIN rail enclosure. Fix mode filters non-standard data and corrects timing errors.


  • Sundrax SwitchGate DIN
    £270.00 £216.00

    Din rail mount DMX switcher SwitchGate DIN with enhanced functionality is designed to switch 8 power circuits on and off by DMX commands, device provides a diagnostic feedback from up to 16 AC inputs via...


  • DINTEC Wireless DMX Receiver
    £330.00 £264.00

    DINTEC Wireless DMX system allows transmission of one DMX universe over wireless. It supports one full DMX universe of up to 512 channels at maximum refresh rate. Fully comaptible with existing CRMX based wireless products...


  • DMX DINTEC Wireless DMX Transmitter
    £330.00 £264.00

    DINTEC Wireless DMX system allows transmission of one DMX universe over wireless. It supports one full DMX universe of up to 512 channels at maximum refresh rate. Fully comaptible with existing CRMX based wireless products...


Can’t find what you are looking for?

Contact the Sales Team for POA pricing.

Back to Top