A stainless steel snap in 150mm extension used to join two supaclamps together. This item is an accessory for the Doughty Super Clamp Technical Specification Overview WLL Not...

A stainless steel Snap In Swivel Joiner used to join two supaclamps together. This item is an accessory for the Doughty Super Clamp Technical Specification Overview WLL Not Rated Finish Stainless...

A range of stainless steel snap in studs designed to fit the Supaclamp. Available in either M12 x 30 or M10 x 25. This item is an accessory for the Doughty Super Clamp Technical...

A brass double ended snap in 16mm spigot with a ¼” and 3/8″ UNC thread. This spigot features two 16mm shanks to be used with 16mm receivers and a ¼” UNC thread one end and a 3/8″ UNC...

G1180: A brass snap in 16mm spigot with a 3/8″ UNC thread. This spigot features a 16mm shank to be used with 16mm receivers and a 3/8″ UNC thread as used with larger cameras and accessories. G1181: A brass snap...

A brass snap in socket with an M10 thread. This spigot features a hex head and will freely rotate unless locked with the thumb screw. This item is an accessory for the Doughty Super Clamp Technical...

A brass snap in spigot with ¼” UNC thread as used on most Cameras & accessories. This spigot features a knurled ring to grip whilst tightening, the spigot and accessory is then able to rotate or can be...

An M10 x 25 brass snap in spigot which allows 360 degrees rotation. Supplied with a wing nut this spigot features a knurled ring to grip whilst tightening the wing nut, the spigot and accessory is then able to rotate or can...

A steel snap in 100mm X 100mm Mounting Plate designed to fit the Supaclamp. This item is an accessory for the Doughty Super Clamp Technical Specification Overview WLL Not...

A stainless steel snap in either an M10 or M12 socket designed to fit the Supaclamp. This item is an accessory for the Doughty Super Clamp Technical Specification Overview WLL Not...

A range of stainless steel snap in pins designed to fit the Supaclamp. Available in three sizes. Technical Specification Overview WLL Not Rated Materials Stainless SteelGrade 8.8...

A 28mm diameter male TV spigot available with M12 stud. Technical Specification Overview WLL Not Rated Finish Silver Spigot Diameter 28mm Materials Stainless SteelGrade 8.8...

A 28mm diameter male TV spigot available with M10. Technical Specification Overview WLL Not Rated Finish Silver Spigot Diameter 28mm Materials Stainless SteelGrade 8.8...

A short shank female TV spigot available with an M10 female thread. Technical Specification Overview WLL Not Rated Finish Silver Spigot Diameter 28mm Materials AW6082 T6 AluminiumFasteners...

Aluminium stand tops with an M10 female threaded hole suitable for Doughty stands. Supplied with bolt and washers. Available to fit 32mm (1¼”) stand tubes. Ideal for use with our range of Tee Bars. Technical...

A really useful range of aluminium tops with an M10 female threaded hole suitable for 48mm diameter tube. Supplied with bolt and washers. Technical Specification Overview WLL Not...