Enttec - OCTO

£153.60 (inc V.A.T.) £128.00 (exc V.A.T.)
0.11 KGS
Calculated at checkout

Add to Wish List

Click the button below to add the Enttec - OCTO to your wish list.

Product Description

The OCTO is a Next Gen DIN rail eDMX -> pixel data converter & controller capable of controlling up to 1360 RGB LED pixels. It makes control of digital LED pixel strips a breeze via an easy to use web interface or by receiving up to 8 Universes of DMX over Ethernet.

The latest evolution of our 8-Universe, dual-output eDMX to LED pixel data converter, the OCTO is a robust and reliable installation-grade device that connects directly to your pixels, engineered to take any architectural, commercial or entertainment project to the next level.

Designed for ultra-fast deployment of LED strips and pixel dot systems, the OCTO is compatible with a wide range of input and output protocols with an industry leading voltage input range.

Its installer-friendly features include an identify button to check correct wiring without a data source, internal effect generator, temperature monitoring, intuitive configuration and management through its localhost web interface. Flexible TS35 DIN rail or surface mount options and network chaining make the OCTO the ultimate go-to pixel control device.


Perfect for tight spaces

The OCTO’s compact non-conductive casing is capable of being surface mounted in various orientations. Or can be fitted to a TS35 DIN rail using the DIN clip accessory included in the box. The two network ports on the OCTO allow multiple units to be chained together with a maximum cable length of 100m between devices to significantly cut down on multiple cable runs.

Professional networking

The OCTO supports Art-Net, sACN, KiNet™ and ESP inputs to give flexibility on your project. ArtSync to ensure all pixel and DMX outputs on project are synchronised to stop any chance of image tearing. The OCTO allows either DHCP of Static IP configuration to suit your use case.

Web configuration

The OCTO’s intuitive web-based configuration gives you access to configure, update and monitor the temperature using your preferred browser from anywhere on the network.

To save the number input channels required from your control software, the OCTO features a grouping functionality to reduce input channel count whilst still controlling up to 8 Universes of LED pixels.

Supports a wide range of LED strips and dots

Each OCTO can control up to 8 Universes of pixels (1024 RGBW / 1360 RGB / 4096 W), with support for protocols with and without a clock line. See the Downloads section for a comprehensive table showing all currently compatible LED protocols. ENTTEC can implement additional LED protocols if needed to suit your project requirements.

Wide voltage range

Whether you want to control 5V pixel tape or 60V pixel dots, the OCTO can do it all. With its wide voltage input range, giving the flexibility to power it directly from the same source as your LED pixels.

Smart features

The Test/Reset button allows installers to quickly check wiring is correct without requiring a network connection. Simply press the button for the output to be illuminated white for 10 seconds.

What’s more, the OCTO features a pixel grouping function perfect for reducing the control channel count of your installation whilst still controlling the same quantity of pixels.

Standalone mode

The OCTO features a simple FX generator mode to create and execute preset effects on the fly without any knowledge of DMX, configurable to play from power up with no user interaction. This mode is unique to the OCTO and is perfect for ‘set and forget’ applications where DMX playback devices are not required and space is a premium. Up to 100 standalone effects can be created and stored.

The OCTO features a simple FX generator mode to create and execute preset effects on the fly without any knowledge of DMX, configurable to play from power up with no user interaction. This mode is unique to the OCTO and is perfect for ‘set and forget’ applications where DMX playback devices are not required and space is a premium. Up to 100 standalone effects can be created and stored.

For more complex installations, this mode can be used as a more complex version of the test button to check all pixels connected are responding as intended across a full spectrum of colours and dynamic patterns.



Unboxing the NEW ENTTEC OCTO!

Meet the little box that packs a HUGE punch!

Technical Specification

Connetors 2* RJ 45 network port
2* 4 Pin output phoenix
1* 2 Pin power input phoenix
eDMX data input protocols Art-Net
Pixel output protocols Compatible with synchronous and Asynchronous pixel protocols. For the latest list please refer to the support page: orted-led-pixel-protocols/
Maximum eDMX -> pixel conversion per device 2048 channels
Max. pixels controllable per device RGB: 1360 (680 per port)
RGBW: 1024 (512 per port)
Max. output refresh rate 46 frames per second (fps)
Network speed 10/100Base-T
Network discovery Discovered through ENTTEC’s NMU software
Network configuration Static (Default / DHCP
Integrated network switch Yes
Recommended network device quantity per chain Chains of up to 8 devices give optimum synchronization between outputs
Identify / Reset button Yes
LED indicators Forward facing LED indicator
Network link / activity (integrated into RJ45 connectors)
Configurable pixel color ordering. Yes
Creation of effects and presets on the device. Yes
Play preset upon startup Yes
Firmware updates Upgradable via web interface
Input voltage 4-60V DC
Max. power draw 5W
Max. heat dissipation 4.5 W
Operating temperature -20°C to +60°C
Operating humidity 5- 95% (non-condensing)
IP rating IP20
Body material ABS plastic
Mounting options Surface mount
TS35 DIN Rail mount
Dimensions 100.5 * 72.25 * 34mm
Weight 0.11 kg
Packaging Dimensions 160 * 140 * 40mm
Shipped Weight 0.18 kg
Warranty 3 year return to base manufacturer warranty
User Guide Download
Data Sheet Download

Please Note: This product is intended for professional use only.

Product Reviews

Write Review

This product hasn't received any reviews yet. Be the first to review this product!

Custom Tab

To edit this page simply login to the control panel, click the Website Content tab and choose the View Web Pages option. Click Edit next to the Shipping & Returns page and you can change this text. A sample returns policy is shown below which you can edit as needed.

Returns Policy

You may return most new, unopened items within 30 days of delivery for a full refund. We'll also pay the return shipping costs if the return is a result of our error (you received an incorrect or defective item, etc.).

You should expect to receive your refund within four weeks of giving your package to the return shipper, however, in many cases you will receive a refund more quickly. This time period includes the transit time for us to receive your return from the shipper (5 to 10 business days), the time it takes us to process your return once we receive it (3 to 5 business days), and the time it takes your bank to process our refund request (5 to 10 business days).

If you need to return an item, simply login to your account, view the order using the "Complete Orders" link under the My Account menu and click the Return Item(s) button. We'll notify you via e-mail of your refund once we've received and processed the returned item.


We can ship to virtually any address in the world. Note that there are restrictions on some products, and some products cannot be shipped to international destinations.

When you place an order, we will estimate shipping and delivery dates for you based on the availability of your items and the shipping options you choose. Depending on the shipping provider you choose, shipping date estimates may appear on the shipping quotes page.

Please also note that the shipping rates for many items we sell are weight-based. The weight of any such item can be found on its detail page. To reflect the policies of the shipping companies we use, all weights will be rounded up to the next full pound.

Related Products

Back to Top