Factory fitted with a snap-in pin for use in conjunction with the G1160 Supaclamp or similar accessories. The clamp plates are designed to accept 16, 12, 10 and 6mm diameter pole/arms. This item is an accessory for the...

A steel snap in Offset arm with two 16mm lighting pins designed to fit the Supaclamp. This item is an accessory for the Doughty Super Clamp Technical Specification Overview Spigot Diameter 2 x Ø15...

A stainless steel snap in 150mm extension used to join two supaclamps together. This item is an accessory for the Doughty Super Clamp Technical Specification Overview WLL Not...

A stainless steel Snap In Swivel Joiner used to join two supaclamps together. This item is an accessory for the Doughty Super Clamp Technical Specification Overview WLL Not Rated Finish Stainless...

A range of stainless steel snap in studs designed to fit the Supaclamp. Available in either M12 x 30 or M10 x 25. This item is an accessory for the Doughty Super Clamp Technical...

A brass double ended snap in 16mm spigot with a ¼” and 3/8″ UNC thread. This spigot features two 16mm shanks to be used with 16mm receivers and a ¼” UNC thread one end and a 3/8″ UNC...

G1180: A brass snap in 16mm spigot with a 3/8″ UNC thread. This spigot features a 16mm shank to be used with 16mm receivers and a 3/8″ UNC thread as used with larger cameras and accessories. G1181: A brass snap...

A brass snap in socket with an M10 thread. This spigot features a hex head and will freely rotate unless locked with the thumb screw. This item is an accessory for the Doughty Super Clamp Technical...

A brass snap in spigot with ¼” UNC thread as used on most Cameras & accessories. This spigot features a knurled ring to grip whilst tightening, the spigot and accessory is then able to rotate or can be...

An M10 x 25 brass snap in spigot which allows 360 degrees rotation. Supplied with a wing nut this spigot features a knurled ring to grip whilst tightening the wing nut, the spigot and accessory is then able to rotate or can...

A steel snap in 100mm X 100mm Mounting Plate designed to fit the Supaclamp. This item is an accessory for the Doughty Super Clamp Technical Specification Overview WLL Not...

A stainless steel snap in either an M10 or M12 socket designed to fit the Supaclamp. This item is an accessory for the Doughty Super Clamp Technical Specification Overview WLL Not...

A range of stainless steel snap in pins designed to fit the Supaclamp. Available in three sizes. Technical Specification Overview WLL Not Rated Materials Stainless SteelGrade 8.8...

A steel heavy duty hook clamp suitable for 48mm to 51mm diameter tube fitted with a 29mm receiver designed to accept a 28mm spigot and a lynch pin for secondary safety. Zinc plated finish or powder coated black. All Hook...

The industry standard. The Doughty Tank Trap provides the means to support a 48mm vertical tube or scaffold pole and is ideal for side lighting. Consists of a 600mm square steel plate with a 48mm receiver welded to it...

A 28mm Spigot fitted with a roller race top used for the smooth operation of a followspot. Technical Specification Overview WLL Not Rated Finish Black Spigot...

A 28mm diameter male TV spigot available with M12 stud. Technical Specification Overview WLL Not Rated Finish Silver Spigot Diameter 28mm Materials Stainless SteelGrade 8.8...

A 28mm diameter male TV spigot available with M10. Technical Specification Overview WLL Not Rated Finish Silver Spigot Diameter 28mm Materials Stainless SteelGrade 8.8...

A short shank female TV spigot available with an M10 female thread. Technical Specification Overview WLL Not Rated Finish Silver Spigot Diameter 28mm Materials AW6082 T6 AluminiumFasteners...

Aluminium stand tops with an M10 female threaded hole suitable for Doughty stands. Supplied with bolt and washers. Available to fit 32mm (1¼”) stand tubes. Ideal for use with our range of Tee Bars. Technical...

A steel floor plate cleverly designed to accept a standard T20100 Hook Clamp. This enables a fixture fitted with a hook clamp to be floor mounted quickly and easily. Technical Specification Overview WLL Not...

A steel truss adaptor supplied with two slimline aluminium half couplers to fit 48mm to 51mm diameter truss tubes and are each 50mm wide. Supplied with a fixed 28mm diameter TV Spigot to fit most stand receivers. Suitable...

A steel brace weight painted black. It has location lugs so they stack easily and slots to accept stage braces. It also has a useful 29mm diameter hole to accept a 28mm diameter TV spigot. Ideal when used with stage braces...

A high tensile extruded aluminium clamp that is suitable for 48mm to 51mm (1.89″ – 2.01″) diameter tubes and is 50mm (1.97″) wide factory fitted with a 28mm (1.10″) diameter TV spigot...

A really useful range of aluminium tops with an M10 female threaded hole suitable for 48mm diameter tube. Supplied with bolt and washers. Technical Specification Overview WLL Not...