railSwitch provides six mains voltage relays that can be switched independently. It is housed in a high impact DIN Rail mounting case. The control interface uses DMX512 and RDM (Remote Device Management). The RDM interface...
Rail-Contact monitors the state of 8 contact closures and translates this into a value on DMX channels 1 to 8. When a contact closure is active the corresponding value of DMX is 255. If more than 8 channels are required...
railMerge is a DIN rail mounted product that merges two DMX inputs to one DMX output. The inputs are independently isolated with a high level electrical protection. It is configured via an 8-way DIP switch that enables...
Art-Switch PoE4™ is a DIN-Rail Layer 2 Ethernet switch. It provides five 10/100BaseT Ethernet ports, four of which support Power over Ethernet (PoE). Art-Switch PoE4 is housed in a small robust DIN Rail case that can...
artLynx is an Art-Net 4 / sACN enabled DIN rail ethernet-to-DMX512/RDM gateway. It is available in three variants: artLynx duo (basic model, 2 universe conversion) artLynx quad (premium model, 4 universe...
Top-of-the-range DIN rail splitter. railSplit extreme is an upgraded version of railSplit RDM, optimised for harsh conditions and use in electrically noisy environments. It is a 1-in-to-6-out DMX512 splitter with support for...
railSplit RDM is a high specification, low cost DMX512/RDM splitter and fixer designed for permanent installations. (If you don’t need RDM, see the sister product railSplit DMX). railSplit RDM is DIN Rail mounted for...
railSplit DMX is an entry level DMX512 splitter designed for permanent installations. (If you need RDM, see the sister product, railSplit RDM). It is DIN Rail mounted for ease of installation. All connections are via screw...
The FLX S48 Console is a 48 fader lighting control surface that brings the legacy and power of our consoles in an easy-to-use package at an affordable price. A lighting design-centric console built for the non-designer,...
The FLX S24 Console is a 24 fader lighting control surface that brings the legacy and power of our consoles in an easy-to-use package at an affordable price. A lighting design-centric console built for the non-designer,...
Moving Light Assistant is an application designed to document both the physical setup and programming information for moving light rigs commonly used in the entertainment industry. The application will run on both Apple...
Bigger shows call for more accessibility and ease of programming. The Obey 70 bridges the gap between smaller rack mount controllers and massive control desks. 14 faders and an assignable joystick allow for easy programming...
The Obey 40 is the next step up from the Obey 10, allowing for control of up to 12 fixtures at 16 channels each. With a slightly larger size comes a larger capacity: the Obey 40 has 30 banks on 8 scenes, or up to 240 scenes...
The Data Stream 4 is a universal DMX-512 optical splitter designed to distribute the incoming DMX signal, in daisy chain configurations, into four separate outputs with an additional “thru” port...
This intuitive 2D and 3D LED pixel mapping solution has options to suit any project, ranging from 4 universes up to an impressive 2048 universes Control up to 2048 Universes of DMX 512. That’s over a million channels...
Control LED pixels with ease ENTTEC’s Pixelator Mini is an installation-grade Ethernet pixel converter designed to make control of LED pixel dots and strip simple. In total, the Pixelator Mini can convert up to...
Littlite LED Gooseneck light with 3-pin, right angle XLR connector. Available in 12 inch (30.48 cm), 18 inch (45.72 cm) or 24 inch (60.96 cm) gooseneck length. Light output is white. Featuring Littlite’s proprietary...
Littlite Halogen 18 inch (45.72 cm) gooseneck. Wattage: 5 Watts Draw @ 12V: 380 mA Light Output: 235 Lux Color Temperature: 3000K Color Rendering: N/A Average Life @ 12V: 2000 Hours Please Note: This product is intended for...
The SceneStation Programmer’s IR Remote is a handheld remote control that is used to program and operate a SceneStation. The 33-button remote has keys for recalling a scene, adjusting the grandmaster, lock, setting...
The SceneStation User's Remote is great for controlling a SceneStation. Use the remote to recall presets from SceneStation's memory, edit overall brightness or power SceneStation on and off. TECHNICAL SPECIFICATIONS ...
SceneStation sets a new standard for full-featured, easy to use, cost-effective DMX lighting control. The Portable SceneStation is entirely self-contained in a ruggedized metal enclosure with 5-pin XLR jacks. Perfect for...
Full-featured Eos software is available for installation on Windows and Mac computers. The software is free to download, and can be used to create or edit show files for any Eos Family controller. When an ETCnomad key is...
Phantom ZerOS is an offline editor for the ZerOS consoles and provides full desk functionality from a standard Windows PC. Show files can be loaded from USB, manipulated using the standard desk controls and then re-saved as...
Quickly add faders to a console running ZerOS or NEO software, such as the FLX, FLX S, or ZerOS Server or NEO X, with the ZerOS Wing. The ZerOS Wing has been designed to be simple and quick to setup and use. There are no...
Bells and whistles are great if you need them. If you don’t, you want maximum value from a minimum spend. That’s where the Open DMX USB comes in! The Open DMX USB features a robust USB type-B port to connect to...
Is your DMX daisy chain out of control? With its stylish black ABS body, designed and made in Australia, the D-Split DMX opto-splitter will make life easier with simplified distribution . The D-Split is both an optical...
Products don’t become an industry standard for no reason. Used on a daily basis by countless lighting designers and installers across the world, the DMX USB converter has proven for many years that it’s a...
Your Sales Partner of Choice
Extended Range, POA Pricing
Back to Top