Rigging

Theatrical sidearms are asked to do a job they were never designed to do. A typical sidearm is made up of a c-clamp and a piece of ½” pipe. When downward pressure is placed on the pipe, it will bend the bolt of...

Theatrical sidearms are asked to do a job they were never designed to do. A typical sidearm is made up of a c-clamp and a piece of ½” pipe. When downward pressure is placed on the pipe, it will bend the bolt of...

Safety bonds are a secondary safety device used with lighting and sound equipment taking the load should the primary fixing fail. Safety wire length: 700mm approx.

Safety bonds are a secondary safety device used with lighting and sound equipment taking the load should the primary fixing fail. Safety wire length: 660mm approx.

Safety bonds are a secondary safety device used with lighting and sound equipment taking the load should the primary fixing fail. Safety wire length: 690mm approx.

Safety bonds are a secondary safety device used with lighting and sound equipment taking the load should the primary fixing fail. Safety wire length: 400mm approx.

Safety bonds are a secondary safety device used with lighting and sound equipment taking the load should the primary fixing fail. Safety wire length: 690mm approx.

A useful steel Universal Joint which is supplied with two M12 fixing holes. This joint can be used in conjuction with many of our clamps to help overcome flying bars from angled suspension points. Technical...

The steel universal clamp is designed to fit 48mm tubes. The industry standard way to drop M12 studding from barrel. Shaped to captivate a bolt head or nut. Zinc plated finish or powder coated black. Technical...

An innovative pressure die cast aluminium clamp that is suitable for 48mm to 51mm diameter tubes. It has a WLL of 20Kg and is 28mm wide. Slotted to hold captive an M10 nut or bolt head. Ideal for use with lightweight...

A high tensile extruded aluminium trigger clamp that is suitable for 48mm to 51mm diameter tubes. It has a WLL of 200Kg and is 30mm wide. Slotted to hold captive an M12 nut or bolt head. Ideal for hanging large moving heads...

The industry standard. The Doughty Tank Trap provides the means to support a 48mm vertical tube or scaffold pole and is ideal for side lighting. Consists of a 600mm square steel plate with a 48mm receiver welded to it...

Supaclamps are pressured die cast aluminium clamps capable of clamping any surface from 13mm flat to 50mm diameter pole. Rubber grip pads prevent damage to surfaces. They are supplied with a wedge to grip flat surfaces...

A heavy duty steel tube joiner used to join 48mm tubes externally. Zinc plated finish Video Ways to Join Barrel A look at many different ways to join two pieces of barrel. Technical...

A heavy duty steel tube joiner used to join 48mm tubes externally. Zinc plated finish Video Ways to Join Barrel A look at many different ways to join two pieces of barrel. Technical...

A pressed steel fixed double coupler used to join two tubes at 90 degrees to each other. Designed to fit 48mm diameter tube. Supplied with a passivate finish but this can vary between silver and gold. Technical...

A 28mm Spigot fitted with a roller race top used for the smooth operation of a followspot. Technical Specification Overview WLL Not Rated Finish Black Spigot...

A high tensile extruded aluminium quick trigger clamp that is suitable for 38mm to 51mm diameter tubes. It has a WLL of 100Kg and is 30mm wide. Slotted to hold captive an M10 or M12 nut or bolt head and supplied with an...

A high tensile extruded aluminium quick trigger clamp that is suitable for 38mm to 51mm diameter tubes. It has a WLL of 100Kg and is 30mm wide. Slotted to hold captive an M10 or M12 nut or bolt head. Ideal for hanging large...

A high tensile extruded aluminium quick trigger clamp that is suitable for 38mm to 51mm diameter tubes. It has a WLL of 250Kg and is 50mm wide. Slotted to hold captive an M10 or M12 nut or bolt head. Ideal for hanging large...

A galvanised steel fitting designed to provide a structional base fixing. The holes in the base plate are large enough to enable the use of mechanical or chemical anchor fixings. Technical...

A high tensile extruded aluminium clamp that is suitable for 48mm to 51mm diameter tubes. It has a WLL of 100Kg and is 30mm wide. Slotted to hold captive an M10 nut or bolt head and supplied with an M10 X 30 bolt and wing...

A plastic end stop for 48mm diameter tube. Available in grey or black. Technical Specification Overview WLL Not Rated Tube Diameter 48mm Finish GreyBlack Please Note: This product...

A galvanised steel fitting, designed to provide a 90 degree tee connection between two tubes. This fitting can be used to join two tubes together along the top section of the tee. Technical...

A galvanised steel fitting designed to provide a 90 degree corner. Technical Specification Overview WLL Not Rated Tube Diameter 48mm Finish Silver Materials Malleable IronFixings - Grade 8...

A galvanised steel fitting designed to provide a positional wall or base fixing. Technical Specification Overview WLL Not Rated Tube Diameter 48mm Finish Silver Materials Malleable...

A steel pipe to wall bracket with a zinc plated finish. Designed to mount 48mm diameter tube to a wall with a stand off of 100mm. We recommend these are used in pairs. Technical...