Bar Accessories

A 500mm long aluminium boom arm available in tough powder coated black or silver. Consisting of 48mm aluminium tube welded to a low profile high tensile extruded aluminium half coupler suitable for 48mm to 51mm diameter...

A steel pipe to pipe clamp designed to suspend a 48mm diameter tube from another 48mm diameter tube.  Technical Specification Overview WLL 220Kg Tube Diameter 48mm Clamp...

A high tensile extruded aluminium trigger clamp that is suitable for 48mm to 51mm diameter tubes. Has a WLL of 200Kg and is 30mm wide factory fitted with an Eye Nut. Available in polished silver. Technical...

A galvanised steel fitting designed to provide a cross joint between a vertical and two horizontal tubes. Technical Specification Overview WLL Not Rated Tube...

A galvanised steel fitting, designed to be used as a four way cross that enables the vertical to pass through the centre of the fitting. The four outlets then operate at 90 degrees. The vertical must remain continuous with...

A galvanised steel fitting, designed to provide a 90 degree corner with the vertical tube passing through the pipeclamp. Technical Specification Overview WLL Not Rated Tube...

Theatrical sidearms are asked to do a job they were never designed to do. A typical sidearm is made up of a c-clamp and a piece of ½” pipe. When downward pressure is placed on the pipe, it will bend the bolt of...

A galvanised steel fitting designed to provide a positional wall or base fixing. Technical Specification Overview WLL Not Rated Tube Diameter 48mm Finish Silver Materials Malleable...

A steel pipe to wall bracket with a zinc plated finish. Designed to mount 48mm diameter tube to a wall with a stand off of 100mm. We recommend these are used in pairs. Technical...

The industry standard half coupler factory fitted with an Eye Nut. A high tensile extruded aluminium clamp that is suitable for 48mm to 51mm (1.89” – 2.01”) diameter tubes and is 50mm (1.97 lbs) wide. Ideal...