With tens of thousands of units sold since their introduction in 2011, ShoW Baby plug and play transceivers set the standard for ease of use and reliability at an affordable price point. The addition of Multiverse radio...

railSwitch provides six mains voltage relays that can be switched independently. It is housed in a high impact DIN Rail mounting case. The control interface uses DMX512 and RDM (Remote Device Management). The RDM interface...

Rail-Contact monitors the state of 8 contact closures and translates this into a value on DMX channels 1 to 8. When a contact closure is active the corresponding value of DMX is 255. If more than 8 channels are required...

railMerge is a DIN rail mounted product that merges two DMX inputs to one DMX output. The inputs are independently isolated with a high level electrical protection. It is configured via an 8-way DIP switch that enables...

artLynx is an Art-Net 4 / sACN enabled DIN rail ethernet-to-DMX512/RDM gateway. artLynx offers massively increased processing power, allowing it to operate effortlessly on networks which are congested with broadcast data...

railSplit extreme is an upgraded version of railSplit RDM, optimised for harsh conditions and for use in electrically noisy environments. It is a 1-in-to-6-out DMX512 splitter with support for RDM and a fix mode which...

railSplit RDM is DIN Rail mounted for ease of installation. All connections are via screw terminals. DMX loop through and termination options are provided. The product offers high levels of electrical protection. It can...

railSplit DMX is an entry level DMX512 splitter designed for permanent installations. (If you need RDM, see the sister product, railSplit RDM). It is DIN Rail mounted for ease of installation. All connections are via screw...

The FLX S48 Console is a 48 fader lighting control surface that brings the legacy and power of our consoles in an easy-to-use package at an affordable price. A lighting design-centric console built for the non-designer,...

The FLX S24 Console is a 24 fader lighting control surface that brings the legacy and power of our consoles in an easy-to-use package at an affordable price. A lighting design-centric console built for the non-designer,...

Moving Light Assistant is an application designed to document both the physical setup and programming information for moving light rigs commonly used in the entertainment industry. The application will run on both Apple...

Bigger shows call for more accessibility and ease of programming. The Obey 70 bridges the gap between smaller rack mount controllers and massive control desks. 14 faders and an assignable joystick allow for easy programming...

The Obey 40 is the next step up from the Obey 10, allowing for control of up to 12 fixtures at 16 channels each. With a slightly larger size comes a larger capacity: the Obey 40 has 30 banks on 8 scenes, or up to 240 scenes...

The Data Stream 4 is a universal DMX-512 optical splitter designed to distribute the incoming DMX signal, in daisy chain configurations, into four separate outputs with an additional “thru” port...

This intuitive 2D and 3D LED pixel mapping solution has options to suit any project, ranging from 4 universes up to an impressive 2048 universes Control up to 2048 Universes of DMX 512. That’s over a million...

Control LED pixels with ease ENTTEC’s Pixelator Mini is an installation-grade Ethernet pixel converter designed to make control of LED pixel dots and strip simple. In total, the Pixelator Mini can convert up to...

The SceneStation Programmer’s IR Remote is a handheld remote control that is used to program and operate a SceneStation. The 33-button remote has keys for recalling a scene, adjusting the grandmaster, lock, setting...

The SceneStation User's Remote is great for controlling a SceneStation.  Use the remote to recall presets from SceneStation's memory, edit overall brightness or power SceneStation on and off. TECHNICAL...

SceneStation sets a new standard for full-featured, easy to use, cost-effective DMX lighting control. The Portable SceneStation is entirely self-contained in a ruggedized metal enclosure with 5-pin XLR jacks. Perfect for...

Full-featured Eos software is available for installation on Windows and Mac computers. The software is free to download, and can be used to create or edit show files for any Eos Family controller. When an ETCnomad key is...

Phantom ZerOS is an offline editor for the ZerOS consoles and provides full desk functionality from a standard Windows PC. Show files can be loaded from USB, manipulated using the standard desk controls and then re-saved as...

Quickly add faders to a console running ZerOS or NEO software, such as the FLX, FLX S, or ZerOS Server or NEO X, with the ZerOS Wing. The ZerOS Wing has been designed to be simple and quick to setup and use. There are no...

The Open DMX USB is a no-frills, inexpensive way to get into the world of controlling DMX devices from your computer. Perfect for project work, small live music and amateur theatre applications. Maximum value from a minimum...

Is your DMX daisy chain out of control? With its stylish black ABS body, designed and made in Australia, the D-Split DMX opto-splitter will make life easier with simplified distribution . The D-Split is both an optical...

Is your DMX daisy chain out of control? With its stylish black ABS body, designed and made in Australia, the D-Split DMX opto-splitter will make life easier with simplified distribution . The D-Split is both an optical...

Products don’t become an industry standard for no reason. Used on a daily basis by countless lighting designers and installers across the world, the DMX USB converter has proven for many years that it’s a...