holds down individual cables directly on the chord tube possible to straighten cables by pulling them taut – axial resistance provided by rubber band no change in workflow; continuing easy installation and removal of...
Truss clamp SNAP is available in the colours black and silver. Material: Plastic (polyamide) Compatible with all standard 2 inch (48-51mm) Truss FEATURES Cable Routing Holds cables up to a total cross-section of...
The OPTI Trilite 200 Grey Plastic Clip Clip has a screw hole and screw by which it is attached to a panel or plate. Once fixed in place OPTI Trilite 200 2 inch Tube can simply be clic fitted into the clip. It is a fast,...
This metal OPTI Trilite 200 Panel Clip is a simple, visible way to secure solid panels into OPTI Trilite 200 Truss frames. The OPTI Trilite 200 Spring Clip wraps around the 2 inch tube and opens on the other side with two...
The OPTI Trilite 200 Parallel Coupler is used to link two OPTI Trilite 2 inch tubes together, parallel to each other.
The OPTI Trilite 200 Fixed 90°Coupler is used to link two OPTI Trilite 2 inch tubes together, at right angles to each other.
The OPTI Trilite 200 Swivel Coupler is used to link two OPTI Trilite 2 inch tubes together, at an adjustable angle to each other.
The OPTI Trilite 200 Half Coupler is used to fix OPTI Trilite 2 inch tube to Walls, other structures or larger panels.
The Standard OPTI Trilite 200 Quad Hinged Junction 2A QD HNG is used for flexible joints in OPTI Trilite Structures. OPTI Trilite 200 Quad Hinged Junctions adjust to any angle through 180° in a universal plane.
The Standard OPTI Trilite 200 Triangular Hinged Junction 2A TR HNG is used for flexible joints in OPTI Trilite Structures. OPTI Trilite 200 Triangular Hinged Junctions adjust to any angle through 180° (apex up/down)...
The Standard OPTI Trilite 200 Ladder Hinged Junction 2A LD HNG is used for flexible joints in OPTI Trilite Ladder Structures. OPTI Trilite 200 Ladder Hinged Junctions adjust to any angle through 180° in a vertical plane...
OPTI Trilite 200 Series Outriggers can be easily connected to the legs of 2 inch OPTI Trilite structures to add strength and lateral stability. It is recommended that at least two OPTI Trilite 200 Series Outriggers are used...
A round cornered 100mm x 100mm square 4mm thick aluminium plate with a half length spigot connector welded to it for use with single 2 inch OPTI Trilite tube. If used as part of an OPTI Trilite 18+ structure the plate will...
OPTI Trilite 200 Series Reinforcing Collars protect and strengthen the ends of 2 inch tube and truss. OPTI Trilite 200 Series Reinforcing Collars are fitted as standard on OPTI Trilite 18+ and can also be fitted to any OPTI...
Where the floor surface is uneven or it is necessary to adjust the height of a structure, by up to 50mm (from 20mm to 70mm), OPTI Trilite 2 inch Adjustable Feet are the answer. Each OPTI Trilite 200 Adjustable Foot screws...
Both Long (225mm) and Short (125mm) OPTI Trilite 200 Series Hanging Clamps are mostly used to fix light and sound equipment to OPTI Trilite 200 Series rigs but can be used to hang any object with an M10 bolt hole...
OPTI Trilite 200 Quad End Pods neatly finish off lengths of truss with a 45° angle nose section. There are three main types of OPTI Trilite 200 Quad End Pod: Quad Pod - is a clean OPTI Trilite 200 Quad End Pod finished...
OPTI Trilite 200 Triangular End Pods neatly finish off lengths of truss with a 45° angle nose section. There are three main types of OPTI Trilite 200 Triangular End Pod: Truss Pod Unit - is a clean OPTI Trilite 200...
OPTI Trilite 200 Series Hook on Attachments create strong, temporary 90° Junctions. They allow greater flexibility when creating displays, rigging or exhibition stands to fit different spaces and designs...
OPTI Trilite 200 Series Corner Braces are a simple,effective way to reinforce corner junctions on 2 inch OPTI Trilite structures where extra strength is needed.
Base PlateA round cornered square 4mm thick aluminium plate with four base plate spigot connectors welded at 90° to it for use with OPTI Trilite 200 or 18+ Quad Truss. Extended Base PlateA round cornered square 4mm thick...
Standard Base PlateA round cornered square 4mm thick aluminium plate with three base plate spigot connectors welded at 90° to it for use with OPTI Trilite 200 or 18+ Triangular Truss. Triangular Base PlateA round...
OPTI Trilite 200 Ladder Base PlateA round cornered rectangular 4mm thick aluminium plate with two base plate spigot connectors welded at 90° to it for use with OPTI Trilite 200 or 18+ Ladder Truss. OPTI Trilite 200...
OPTI Trilite 6 Way 90° Junctions can be used for more complex interlinking structures.
OPTI Trilite 5 Way 90° Junctions can be used for more complex interlinking structures.
Back to Top
