Supremely affordable without sacrificing any of the performance, the DIN-ODE PoE Mk2 provides 1 universe of bi-directional DMX to Ethernet conversion, perfect for distributing DMX signals over a network. More powerful than...

The Storm 8 is a compact Ethernet-DMX converter, a smaller sibling to the Storm 24. However, don’t let its size fool you! As one of a kind, the Storm 8 packs a huge punch and is powerful enough to control up to 4096...

DMX512/RDM controlled 4-channel, mains powered trailing edge dimmer. 1kW total at 230 VAC. Suitable for dimmable LED replacement bulbs, CFL and incandescent sources. Xicato GalaXi wireless control additionally supported in...

RackSplit octo is an 8-output DMX/RDM optosplitter /data-fixer with Neutrik XLR5 connectors. It is designed to sit in a 1U slot in a 19" rack, with the added bonus that is is only 50mm deep. The slim profile of the metal...

RDM/DMX streaming device. 4 inputs, 4 outputs. Compatible with LightShark The LS-Node series is the new RDM/DMX streaming range from WORK PRO that supports industry standards ArtNet & sACN. They feature from 1 up to 4...

RDM/DMX streaming device. 2 inputs, 2 outputs. Compatible with LightShark The LS-Node series is the new RDM/DMX streaming range from WORK PRO that supports industry standards ArtNet & sACN. They feature from 1 up to 4...

RDM/DMX streaming device. 1 input, 1 output. Compatible with LightShark The LS-Node series is the new RDM/DMX streaming range from WORK PRO that supports industry standards ArtNet & sACN. They feature from 1 up to 4 DMX...

Rail-Split™ RJ45 is a high specification, low cost DMX512/RDM splitter and fixer designed for permanent installations. (If you don't need RDM, see the sister product Rail-Split DMX). Rail-Split RJ45 is DIN Rail...

Data Stream 8 is a flexible DMX splitter designed to distribute and boost incoming DMX signals from dual inputs into 8 separate outputs via a master 3-position switch. Each input can be used simultaneously and sent to any...

Rail-Switch™ II provides six mains voltage relays that can be switched independently. It is housed in a high impact DIN Rail mounting case. The control interface uses DMX512 and RDM (Remote Device Management). The RDM...

19" Rack adapter for DIN Rail products. Holds 5 standard products (e.g. Rail-Split DMX) Holds 2 wide products TECHNICAL SPECIFICATIONS Net Mass: 0.50 kg Manufacturer: Artistic Licence Engineering Ltd Country of...

Rail-PSU-D4 is a DALI Bus PSU with four outputs (enabling it to power four DALI circuits of up to 64 ballasts each). It has two connections per output to facilitate daisy chain connection, providing easy installation into...

Rail-Flip™ is a modular A-B switch for DMX512 that supports 4 universes. Its primary purpose is automatic switching between a primary and backup lighting controller. It can also be used to switch between different...

DMX512 to analogue conversion has two key applications: Upgrading older analogue dimmers and driving fluorescent ballasts. Rail-Demux™ is an elegant solution to both applications and provides 16 analogue outputs with...

In theatre, touring and architectural applications there are invariably some devices that do not provide a useful form of remote control. daliSwitch™ is an elegant solution to the automation of these devices. Housed...

Rail-Contact monitors the state of 8 contact closures and translates this into a value on DMX channels 1 to 8. When a contact closure is active the corresponding value of DMX is 255. If more than 8 channels are required...

In theatre, touring and architectural applications there are invariably some devices that do not provide a useful form of remote control. daliSwitch™ is an elegant solution to the automation of these devices. Housed...

Rail-Merge is a DIN rail mounted product that merges two DMX inputs to one DMX output. The inputs are independently isolated with a high level electrical protection. It is configured via an 8-way DIP switch that enables...

Art-Switch PoE4™ is a DIN-Rail Ethernet switch. It provides five 10/100BaseT Ethernet ports, four of which support Power over Ethernet (PoE). Art-Switch PoE4 is housed in a small robust DIN Rail case that can also be...

artLynx is an Art-Net 4 / sACN enabled DIN rail ethernet-to-DMX512/RDM gateway. It is available in three variants: artLynx duo (basic model, 2 universe conversion) artLynx quad (premium model, 4 universe...

Rail-Split extreme is our top-of-the-range DIN rail splitter. It is an upgraded version of Rail-Split RDM II that is optimised for harsh conditions and use in electrically noisy environments. Both products...

Rail-Split™ RDM II is a high specification, low cost DMX512/RDM splitter and fixer designed for permanent installations. Rail-Split RDM II is DIN Rail mounted for ease of installation. All connections are via...

Rail-Split™ DMX is an entry level DMX512 splitter designed for permanent installations. It is DIN Rail mounted for ease of installation. All connections are via screw terminals. DMX loop through and termination...

The Pixelator Mini PX1-8D is a DIN-rail Ethernet pixel converter. A compact version of ENTTEC’s flagship Pixelator, it is small yet powerful enough to control up to 8,192 channels (2,730 RGB Pixels). And it does it...

The CueServer 2 Mini (CS-920) is the smallest of the CueServer 2 models and is housed in a rugged anodized aluminum enclosure suitable for desktop use or panel, DIN, or truss mounting using optional bracket kits...

Please Note: This product is intended for professional use only.

Please Note: This product is intended for professional use only.

XND-8 nodes are user friendly sACN and Art-Net to DMX converter supporting the distribution of up to eight universes of DMX via individually optically isolated DMX outputs. Since most major lighting consoles are capable of...