Designed for use with the ENTTEC Pixie Driver. Each pixel can achieve 16,777,216 full colour display and scan frequency non less than 400Hz/s. Technical Specifications Designed for ENTTEC Pixie Driver. Up to 27 Watt/Metre...
2m long cable Female connector at one end (IP67 rated) Loose cable at the other end Recommended accessory to connect the dots to Plink injector or Pixie...
2m long cable Male connector at one end (IP67 rated) Loose cable at the other end Recommended accessory to connect the dots
2m long cable Male connector at one end (IP67 rated) Loose cable at the other end Recommended accessory to connect the dots to Plink injector or Pixie...
Designed for use with the ENTTEC Pixie Driver. Each pixel can achieve 16,777,216 full colour display and scan frequency non less than 400Hz/s. Technical Specifications Designed for ENTTEC Pixie Driver Up to 27 Watt/Metre Up...
Designed for ENTTEC Pixie Driver. Each pixel can achieve 16,777,216 full colour display and scan frequency non less than 400Hz/s. Technical Specifications Designed for ENTTEC Pixie Driver Up to 27 Watt/Metre Up to 586...
The rack mount frame allows mounting of 8 units in a 3RU high enclosure.
Drive your LED tape/strip with the CV driver. A Powerful 250W power supply and driver in one allows you drive up to 25 meters of 24V LED strip from a single unit without needing extra wiring. The ALEPH1 CV DRIVER has full...
The DIN-LED4 1000X is a 4 channel constant current 1000mA LED driver with DMX/RDM input. Each channel can control up to seven 3Watt leds in series Dimming is performed with a 500Hz PWM signal, and 8 bit resolution. There are...
The DIN-LED4 350X is a 4 channel constant current 350mA LED driver with DMX/RDM input. Each channel can control up to seven 1Watt leds in series Dimming is performed with a 500Hz PWM signal, and 8 bit resolution. There are 2...
DIN-LED4 700X is a 4 channel constant current 700mA LED driver with DMX/RDM input. Each channel can control up to seven 2Watt leds in series Dimming is performed with a 500Hz PWM signal, and 8 bit resolution. There are 2...
The DIN-LED4PX is a 4 channel constant voltage LED driver with DMX/RDM input. Each channel can control up to 1A @ 24V (supplied by external power supply) and dimming is performed with a 500Hz PWM signal, and 8 bit resolution...
Allows users to pixel map Kling-Net and DMX compatible fixtures through the Kling-Net mapper included in Media Master Express and Media Master Pro (Zeus). Ideal for use with Flex Pixel Tape and Pixel controllable...
The Pixelator is the world's foremost Ethernet -> Pixel Link converter. A high density device when you need to convert large amounts of DMX Over Ethernet data into Pixels while keeping costs under control. Ideal for any...
The Pixelator Mini is the compact Ethernet -> Pixel Link converter, made by ENTTEC. No other device offers this level of performance in such a compact form factor. Ideal for any LED pixel mapped project using pixel tape...
Pixel strip is the same as common RGB Led strip but each pixel (dot) is individually controllable. Allowing amazing visual effects to be created. The new generation of pixel strips is now available with more density and...
The Pixie linker plugs straight into the Pixie driver and allows you to send the Plink data over standard CAT6 cabling. Note: Works with with 5V Pixie Driver (73540\/73541) only.
Go past the physical barriers and extend your Pixel Control system, by using ENTTEC PLink products. The Plink extender allows mounting of your Pixie driver far away from the pixel tape or pixel dot. The Plink injector...
The QolorFLEX™ 24x3A Dimmer is ideal for applications such as retail displays, signage, and general architectural work. it features 24 channels of control in a compact IP20 (indoor) rated enclosure. Ideal for 1, 2, 3...
The QolorFLEX 2x5A Dimmer provides a tiny but powerful and affordable new way to control LED tape, other LEDs, or low voltage incandescent fixtures. These new miniature dimmers are two channels, with either an...
The QolorFLEX 4.2.5A Dimmer provides a tiny but powerful and affordable new way to control LED tape, other LEDs, or low voltage incandescent fixtures. These new miniature dimmers are four channels, with either an...
The QolorFLEX 4x5A dimmer is a constant voltage dimmer that can control a full 20A of LED tape spread over four channels of 5A each. It is designed to operate perfectly with City Theatrical QolorFlex LED tape,...
The QolorFLEX 4x5A DINRail Dimmer is a constant voltage dimmer that can control a full 20A of LED tape spread over four channels of SA each. It is designed to operate perfectly with City Theatrical QolorFlex LED...
The QolorFLEX 4x5A DINrail RJ45 Dimmer is a constant voltage dimmer that can control a full 20A of LED tape spread over four channels of SA each. It is designed to operate perfectly with City Theatrical QolorFlex...
QolorFLEX™ 5x8A Dimmer (PN5809): The QolorFLEX™ 5x8A Dimmer can control a full 40A of LED tape spread 8A each. This allows the control of unique combinations such as RGB tape (three channels) and bi-colour tape...
On large sets and shows where multiple dimmers and many linear feet of LED tape are required, CTI offers a practical and time saving solution for managing the wiring and making numerous connections where needed. Connect any...
Back to Top
